Welding Consumable Supplier

E-mail: manager@hbaining.com

Mobile Website
Home Products Quality Control News About Us Contact Us

AWS E6011

Dec.10,2020

Description:

E6011 is a high cellulose potassium type welding electrode for carbon steel. It is specially suitable for vertical-down welding. Both AC and DC can be applied and it shows a fine appearance with high welding efficiency. Don't swing electrode too much when welding, the length of arc should be controlled properly and it is not suitable for multi-layer or face welding.


Applications:

Suitable for butt, fillet and lap welding for thin plates structures, such as smoke pipes, wind pipes, oil tanks of transformer, outside cover of vehicles, etc.


Attention:

A.Generally, welding electrodes don't need bake before welding.

B.If damped, the electrodes should be baked for 0.5-1 hour at the temperature of 70-80℃ before welding.

Previous: AWS A5.4 E347-16

Next: AWS A5.4 E309L-16

LinksWelding Electrode Welding Wire Submerged Arc Welding Wire Flux Cored Welding Wire Welding Torch

HomeProductsNewsAbout UsContact UsSitemap

manager@hbaining.com+86 133 6380 3091No.313 East Of Heping Road,Shijiazhuang,China

Copyright © Hebei Aining Welding Consumable Co., Ltd. All Rights Reserved. Technical Support: Reanod.

Jake Song

Ms.Vicky

Ms.Eva

Ms.Amy

Tel: +86-311-6669 7109

manager@hbaining.com
Hebei Welding Consumable Supplier
HomeNews

AWS E6011

Dec.10,2020

Description:

E6011 is a high cellulose potassium type welding electrode for carbon steel. It is specially suitable for vertical-down welding. Both AC and DC can be applied and it shows a fine appearance with high welding efficiency. Don't swing electrode too much when welding, the length of arc should be controlled properly and it is not suitable for multi-layer or face welding.


Applications:

Suitable for butt, fillet and lap welding for thin plates structures, such as smoke pipes, wind pipes, oil tanks of transformer, outside cover of vehicles, etc.


Attention:

A.Generally, welding electrodes don't need bake before welding.

B.If damped, the electrodes should be baked for 0.5-1 hour at the temperature of 70-80℃ before welding.

Previous: AWS A5.4 E347-16

Next: AWS A5.4 E309L-16

Home |Products|Quality Control|News|About Us|Contact Us

+86 133 6380 3091

manager@hbaining.com

No.313 East Of Heping Road,Shijiazhuang,China

Copyright © Hebei Aining Welding Consumable Co., Ltd.

All Rights Reserved. Technical Support: Reanod.

Welding Consumable Supplier

E-mail: manager@hbaining.com

Home Products Quality Control News About Us Contact Us
HomeNews

AWS E6011

Dec.10,2020

Description:

E6011 is a high cellulose potassium type welding electrode for carbon steel. It is specially suitable for vertical-down welding. Both AC and DC can be applied and it shows a fine appearance with high welding efficiency. Don't swing electrode too much when welding, the length of arc should be controlled properly and it is not suitable for multi-layer or face welding.


Applications:

Suitable for butt, fillet and lap welding for thin plates structures, such as smoke pipes, wind pipes, oil tanks of transformer, outside cover of vehicles, etc.


Attention:

A.Generally, welding electrodes don't need bake before welding.

B.If damped, the electrodes should be baked for 0.5-1 hour at the temperature of 70-80℃ before welding.

Previous: AWS A5.4 E347-16

Next: AWS A5.4 E309L-16

Home |Products|Quality Control|News|About Us|Contact Us

manager@hbaining.com+86 133 6380 3091

No.313 East Of Heping Road,Shijiazhuang,China

Copyright © Hebei Aining Welding Consumable Co., Ltd. All Rights Reserved. Technical Support: Reanod.