Welding Consumable Supplier

E-mail: manager@hbaining.com

Mobile Website
Home Products Quality Control News About Us Contact Us

Welding Wire ER70S-G

Dec.23,2020

Description:

ER70S-G is a low alloy steel gas shielded welding wire, protected by pure CO2 or Ar+CO2 gas. Stable arc, low spatters, excellent fabrication weldability and low sensitivity of weld gas porosity can be obained during welding. It can be used for all position welding and has a very good welding performance especially with large welding current.


Applications:

Suitable for single-pass and multi-pass welding for structures fabricated by carbon steel and 500MPa grade low alloy steel, such as vehicles, bridges,construction and mechanical structures etc.


Instructions:

A.Suitable for using shielding gas at the speed of 20-25 liters per minute.

B.Windshield must be set up in the welding zone, due to gas porosity may be caused by strong wind.

C.Wire extention should be 10-20mm if current range is under 300A and if above 300A, 20-25mm.

Previous: Welding Electrode E7015-G

Next: AWS A5.4 E347-16

LinksWelding Electrode Welding Wire Submerged Arc Welding Wire Flux Cored Welding Wire Welding Torch

HomeProductsNewsAbout UsContact UsSitemap

manager@hbaining.com+86 133 6380 3091No.313 East Of Heping Road,Shijiazhuang,China

Copyright © Hebei Aining Welding Consumable Co., Ltd. All Rights Reserved. Technical Support: Reanod.

Jake Song

Ms.Vicky

Ms.Eva

Ms.Amy

Tel: +86-311-6669 7109

manager@hbaining.com
Hebei Welding Consumable Supplier
HomeNews

Welding Wire ER70S-G

Dec.23,2020

Description:

ER70S-G is a low alloy steel gas shielded welding wire, protected by pure CO2 or Ar+CO2 gas. Stable arc, low spatters, excellent fabrication weldability and low sensitivity of weld gas porosity can be obained during welding. It can be used for all position welding and has a very good welding performance especially with large welding current.


Applications:

Suitable for single-pass and multi-pass welding for structures fabricated by carbon steel and 500MPa grade low alloy steel, such as vehicles, bridges,construction and mechanical structures etc.


Instructions:

A.Suitable for using shielding gas at the speed of 20-25 liters per minute.

B.Windshield must be set up in the welding zone, due to gas porosity may be caused by strong wind.

C.Wire extention should be 10-20mm if current range is under 300A and if above 300A, 20-25mm.

Previous: Welding Electrode E7015-G

Next: AWS A5.4 E347-16

Home |Products|Quality Control|News|About Us|Contact Us

+86 133 6380 3091

manager@hbaining.com

No.313 East Of Heping Road,Shijiazhuang,China

Copyright © Hebei Aining Welding Consumable Co., Ltd.

All Rights Reserved. Technical Support: Reanod.

Welding Consumable Supplier

E-mail: manager@hbaining.com

Home Products Quality Control News About Us Contact Us
HomeNews

Welding Wire ER70S-G

Dec.23,2020

Description:

ER70S-G is a low alloy steel gas shielded welding wire, protected by pure CO2 or Ar+CO2 gas. Stable arc, low spatters, excellent fabrication weldability and low sensitivity of weld gas porosity can be obained during welding. It can be used for all position welding and has a very good welding performance especially with large welding current.


Applications:

Suitable for single-pass and multi-pass welding for structures fabricated by carbon steel and 500MPa grade low alloy steel, such as vehicles, bridges,construction and mechanical structures etc.


Instructions:

A.Suitable for using shielding gas at the speed of 20-25 liters per minute.

B.Windshield must be set up in the welding zone, due to gas porosity may be caused by strong wind.

C.Wire extention should be 10-20mm if current range is under 300A and if above 300A, 20-25mm.

Previous: Welding Electrode E7015-G

Next: AWS A5.4 E347-16

Home |Products|Quality Control|News|About Us|Contact Us

manager@hbaining.com+86 133 6380 3091

No.313 East Of Heping Road,Shijiazhuang,China

Copyright © Hebei Aining Welding Consumable Co., Ltd. All Rights Reserved. Technical Support: Reanod.