Welding Consumable Supplier

E-mail: manager@hbaining.com

Mobile Website
Home Products Quality Control News About Us Contact Us

Welding Electrode E7015-G

Dec.30,2020

Description:

E7015-G is low alloy steel welding electrode covered with a sodium low hydrogen type coating. DC is apllied and the electrode should be contacted reversed polarity. During welding, it has the features as follows: deep penetration, small spatters, fine appearance and slag easy to remove. And it achieves good mechannical properties of high tensile strength and excellent toughness.

Applications:

Suitable for welding structures fabricated by low alloy steel, medium and high carbon steel, such as offshore platforms, ships, high press vessels,etc.

Attention:

A.Welding electrodes should be baked at the temperature of 350℃ for one hour before welding.

B.Before welding, the weld metal must be cleared away impurities, such as rust, oil, moisture,etc.

C.Short arc and narrow weld bead are recommended in welding.

Previous: Flux Cored Welding Wire E347L TI-1

Next: Welding Wire ER70S-G

LinksWelding Electrode Welding Wire Submerged Arc Welding Wire Flux Cored Welding Wire Welding Torch

HomeProductsNewsAbout UsContact UsSitemap

manager@hbaining.com+86 133 6380 3091No.313 East Of Heping Road,Shijiazhuang,China

Copyright © Hebei Aining Welding Consumable Co., Ltd. All Rights Reserved. Technical Support: Reanod.

Jake Song

Ms.Vicky

Ms.Eva

Ms.Amy

Tel: +86-311-6669 7109

manager@hbaining.com
Hebei Welding Consumable Supplier
HomeNews

Welding Electrode E7015-G

Dec.30,2020

Description:

E7015-G is low alloy steel welding electrode covered with a sodium low hydrogen type coating. DC is apllied and the electrode should be contacted reversed polarity. During welding, it has the features as follows: deep penetration, small spatters, fine appearance and slag easy to remove. And it achieves good mechannical properties of high tensile strength and excellent toughness.

Applications:

Suitable for welding structures fabricated by low alloy steel, medium and high carbon steel, such as offshore platforms, ships, high press vessels,etc.

Attention:

A.Welding electrodes should be baked at the temperature of 350℃ for one hour before welding.

B.Before welding, the weld metal must be cleared away impurities, such as rust, oil, moisture,etc.

C.Short arc and narrow weld bead are recommended in welding.

Previous: Flux Cored Welding Wire E347L TI-1

Next: Welding Wire ER70S-G

Home |Products|Quality Control|News|About Us|Contact Us

+86 133 6380 3091

manager@hbaining.com

No.313 East Of Heping Road,Shijiazhuang,China

Copyright © Hebei Aining Welding Consumable Co., Ltd.

All Rights Reserved. Technical Support: Reanod.

Welding Consumable Supplier

E-mail: manager@hbaining.com

Home Products Quality Control News About Us Contact Us
HomeNews

Welding Electrode E7015-G

Dec.30,2020

Description:

E7015-G is low alloy steel welding electrode covered with a sodium low hydrogen type coating. DC is apllied and the electrode should be contacted reversed polarity. During welding, it has the features as follows: deep penetration, small spatters, fine appearance and slag easy to remove. And it achieves good mechannical properties of high tensile strength and excellent toughness.

Applications:

Suitable for welding structures fabricated by low alloy steel, medium and high carbon steel, such as offshore platforms, ships, high press vessels,etc.

Attention:

A.Welding electrodes should be baked at the temperature of 350℃ for one hour before welding.

B.Before welding, the weld metal must be cleared away impurities, such as rust, oil, moisture,etc.

C.Short arc and narrow weld bead are recommended in welding.

Previous: Flux Cored Welding Wire E347L TI-1

Next: Welding Wire ER70S-G

Home |Products|Quality Control|News|About Us|Contact Us

manager@hbaining.com+86 133 6380 3091

No.313 East Of Heping Road,Shijiazhuang,China

Copyright © Hebei Aining Welding Consumable Co., Ltd. All Rights Reserved. Technical Support: Reanod.