Welding Consumable Supplier

E-mail: manager@hbaining.com

Mobile Website
Home Products Quality Control News About Us Contact Us

Flux Cored Welding Wire E347L TI-1

Feb.24,2021

Features and Applications:

A. E347L T1-1 Deposited metal contains proper ferrite, so it has excellent weldability. good intergrity of weld bead and high crack resistance.

B. Suitable for welding low C-18Cr-9Ni-Ti stainless steel, and usually used to weld anti-corrosion pressure vessels that request impact toughness at low temperature.

C. Impurities at the weld zone must be cleared away, such as oil, moisure etc.

D. Weld bead shows fine appearance and it has very good welding performance with small spatters and stable arc.

Instructions:

A. Using CO2 as shielding gas, and its purity must be above 99.98%.

B. Windshield must be set up in the welding zone, due to gas porosity may be caused by strong wind.

Previous: None

Next: Welding Electrode E7015-G

LinksWelding Electrode Welding Wire Submerged Arc Welding Wire Flux Cored Welding Wire Welding Torch

HomeProductsNewsAbout UsContact UsSitemap

manager@hbaining.com+86 133 6380 3091No.313 East Of Heping Road,Shijiazhuang,China

Copyright © Hebei Aining Welding Consumable Co., Ltd. All Rights Reserved. Technical Support: Reanod.

Jake Song

Ms.Vicky

Ms.Eva

Ms.Amy

Tel: +86-311-6669 7109

manager@hbaining.com
Hebei Welding Consumable Supplier
HomeNews

Flux Cored Welding Wire E347L TI-1

Feb.24,2021

Features and Applications:

A. E347L T1-1 Deposited metal contains proper ferrite, so it has excellent weldability. good intergrity of weld bead and high crack resistance.

B. Suitable for welding low C-18Cr-9Ni-Ti stainless steel, and usually used to weld anti-corrosion pressure vessels that request impact toughness at low temperature.

C. Impurities at the weld zone must be cleared away, such as oil, moisure etc.

D. Weld bead shows fine appearance and it has very good welding performance with small spatters and stable arc.

Instructions:

A. Using CO2 as shielding gas, and its purity must be above 99.98%.

B. Windshield must be set up in the welding zone, due to gas porosity may be caused by strong wind.

Previous: None

Next: Welding Electrode E7015-G

Home |Products|Quality Control|News|About Us|Contact Us

+86 133 6380 3091

manager@hbaining.com

No.313 East Of Heping Road,Shijiazhuang,China

Copyright © Hebei Aining Welding Consumable Co., Ltd.

All Rights Reserved. Technical Support: Reanod.

Welding Consumable Supplier

E-mail: manager@hbaining.com

Home Products Quality Control News About Us Contact Us
HomeNews

Flux Cored Welding Wire E347L TI-1

Feb.24,2021

Features and Applications:

A. E347L T1-1 Deposited metal contains proper ferrite, so it has excellent weldability. good intergrity of weld bead and high crack resistance.

B. Suitable for welding low C-18Cr-9Ni-Ti stainless steel, and usually used to weld anti-corrosion pressure vessels that request impact toughness at low temperature.

C. Impurities at the weld zone must be cleared away, such as oil, moisure etc.

D. Weld bead shows fine appearance and it has very good welding performance with small spatters and stable arc.

Instructions:

A. Using CO2 as shielding gas, and its purity must be above 99.98%.

B. Windshield must be set up in the welding zone, due to gas porosity may be caused by strong wind.

Previous: None

Next: Welding Electrode E7015-G

Home |Products|Quality Control|News|About Us|Contact Us

manager@hbaining.com+86 133 6380 3091

No.313 East Of Heping Road,Shijiazhuang,China

Copyright © Hebei Aining Welding Consumable Co., Ltd. All Rights Reserved. Technical Support: Reanod.