Welding Consumable Supplier

E-mail: manager@hbaining.com

Mobile Website
Home Products Quality Control News About Us Contact Us

Welding Electrode E8015-G

May.26,2021

Description:

E8015-G is low alloy steel welding electrode covered with a sodium low hydrogen type coating. During welding, DC is applied and the electrode should be contacted reversed polarity. The weld metal has high tensile strength and high toughness mechanical properties and it is suitable for all position welding.

Applications:

Sutiable for medium carbon steel and some low carbon steel, such as 15MnTi, 15MnV, etc.

Attention:

a. Welding electrodes should be baked at the temperature of 380-400℃ for 1-2 hours before welding and then use them when baking.

b. Before welding, the weld metal must be cleared any impurities, such as rust, oil, moisture, etc.

c. Short arc and narrow weld bead are recommended in welding.

Previous: Welding Wire ER80S-G

Next: Flux Cored Welding Wire E347L TI-1

LinksWelding Electrode Welding Wire Submerged Arc Welding Wire Flux Cored Welding Wire Welding Torch

HomeProductsNewsAbout UsContact UsSitemap

manager@hbaining.com+86 133 6380 3091No.313 East Of Heping Road,Shijiazhuang,China

Copyright © Hebei Aining Welding Consumable Co., Ltd. All Rights Reserved. Technical Support: Reanod.

Jake Song

Ms.Vicky

Ms.Eva

Ms.Amy

Tel: +86-311-6669 7109

manager@hbaining.com
Hebei Welding Consumable Supplier
HomeNews

Welding Electrode E8015-G

May.26,2021

Description:

E8015-G is low alloy steel welding electrode covered with a sodium low hydrogen type coating. During welding, DC is applied and the electrode should be contacted reversed polarity. The weld metal has high tensile strength and high toughness mechanical properties and it is suitable for all position welding.

Applications:

Sutiable for medium carbon steel and some low carbon steel, such as 15MnTi, 15MnV, etc.

Attention:

a. Welding electrodes should be baked at the temperature of 380-400℃ for 1-2 hours before welding and then use them when baking.

b. Before welding, the weld metal must be cleared any impurities, such as rust, oil, moisture, etc.

c. Short arc and narrow weld bead are recommended in welding.

Previous: Welding Wire ER80S-G

Next: Flux Cored Welding Wire E347L TI-1

Home |Products|Quality Control|News|About Us|Contact Us

+86 133 6380 3091

manager@hbaining.com

No.313 East Of Heping Road,Shijiazhuang,China

Copyright © Hebei Aining Welding Consumable Co., Ltd.

All Rights Reserved. Technical Support: Reanod.

Welding Consumable Supplier

E-mail: manager@hbaining.com

Home Products Quality Control News About Us Contact Us
HomeNews

Welding Electrode E8015-G

May.26,2021

Description:

E8015-G is low alloy steel welding electrode covered with a sodium low hydrogen type coating. During welding, DC is applied and the electrode should be contacted reversed polarity. The weld metal has high tensile strength and high toughness mechanical properties and it is suitable for all position welding.

Applications:

Sutiable for medium carbon steel and some low carbon steel, such as 15MnTi, 15MnV, etc.

Attention:

a. Welding electrodes should be baked at the temperature of 380-400℃ for 1-2 hours before welding and then use them when baking.

b. Before welding, the weld metal must be cleared any impurities, such as rust, oil, moisture, etc.

c. Short arc and narrow weld bead are recommended in welding.

Previous: Welding Wire ER80S-G

Next: Flux Cored Welding Wire E347L TI-1

Home |Products|Quality Control|News|About Us|Contact Us

manager@hbaining.com+86 133 6380 3091

No.313 East Of Heping Road,Shijiazhuang,China

Copyright © Hebei Aining Welding Consumable Co., Ltd. All Rights Reserved. Technical Support: Reanod.