Description for AWS E6013

Sep. 09, 2015

Features:
AWS E6013 is carbon steel welding electrode covered with a high titania potassium type coating. Both AC and DC can be applied, and it is applicable for all-position welding, including vertical-down welding. It shows a very good welding performance with small spatter, easy restrike arc and very good weld shape.

Application:
Suitable for welding low carbon steel structures and low carbon galvanized plate, especially applicable for vertical-down welding and intermittent welding.

Attention:
a.Generally, welding electrode donot need bake before welding.
b.If damped, the electrodes should be baked for 0.5-1 hour at the temperature of 150-170℃ before welding.

Chemical Composition of Deposited Metal: (%)

	C	Mn	Si	S	P
Standard	≤0.10	0.32-0.55	≤0.30	≤0.035	≤0.040
Typical	0.08	0.45	0.2	0.019	0.020

Mechanical Properties of Deposited Metal:

Tensile Strength (Mpa)	Yield Point (Mpa)	Elongation(%)	Akv Impact (-20℃)
≥420	≥330	≥17	≥47
490	425	24	76

Recommended Current(AC、DC):

Diameter(mm)	2.0	2.5	3.2	4.0	5.0	5.8
Current(A)	50-80	60-100	100-140	150-210	180-240	220-280

Previous: Description, Application and Characters for AWS E7018 Welding Electrode

Next: The Types,Description, Application and Instruction for Argon Arc Welding Wire

Products

News

When to Use the 7018? Read More

When Do Welders Use the 7018? Read More

Welding Electrode E309-16 Read More

Welding Electrode E10015-D2 Read More

Description for AWS E6013

Application:
Suitable for welding low carbon steel structures and low carbon galvanized plate, especially applicable for vertical-down welding and intermittent welding.

Attention:
a.Generally, welding electrode donot need bake before welding.
b.If damped, the electrodes should be baked for 0.5-1 hour at the temperature of 150-170℃ before welding.

Chemical Composition of Deposited Metal: (%)

	C	Mn	Si	S	P
Standard	≤0.10	0.32-0.55	≤0.30	≤0.035	≤0.040
Typical	0.08	0.45	0.2	0.019	0.020

Mechanical Properties of Deposited Metal:

Tensile Strength (Mpa)	Yield Point (Mpa)	Elongation(%)	Akv Impact (-20℃)
≥420	≥330	≥17	≥47
490	425	24	76

Recommended Current(AC、DC):

Diameter(mm)	2.0	2.5	3.2	4.0	5.0	5.8
Current(A)	50-80	60-100	100-140	150-210	180-240	220-280

Description for AWS E6013

Application:
Suitable for welding low carbon steel structures and low carbon galvanized plate, especially applicable for vertical-down welding and intermittent welding.

Attention:
a.Generally, welding electrode donot need bake before welding.
b.If damped, the electrodes should be baked for 0.5-1 hour at the temperature of 150-170℃ before welding.

Chemical Composition of Deposited Metal: (%)

	C	Mn	Si	S	P
Standard	≤0.10	0.32-0.55	≤0.30	≤0.035	≤0.040
Typical	0.08	0.45	0.2	0.019	0.020

Mechanical Properties of Deposited Metal:

Tensile Strength (Mpa)	Yield Point (Mpa)	Elongation(%)	Akv Impact (-20℃)
≥420	≥330	≥17	≥47
490	425	24	76

Recommended Current(AC、DC):

Diameter(mm)	2.0	2.5	3.2	4.0	5.0	5.8
Current(A)	50-80	60-100	100-140	150-210	180-240	220-280