E6011 is a high cellulose potassium type welding electrode for carbon steel. It is specially suitable for vertical-down welding. Both AC and DC can be applied and it shows a fine appearance with high welding efficiency. Don't swing electrode too much when welding, the length of the arc should be controlled properly and it is not suitable for multi-layer or face welding.

Suitable for butt, fillet and lap welding for thin plates structures, such as smoke pipes,wind pipes, oil tanks of transformer, outside cover of vehicles,etc.

Attention:

A.Generally,welding electrodes don't need bake before welding.

B. If damped, the electrodes should be baked for 0.5-1hour at the temperature of 70-80℃ before welding.