Description:

ER80S-G is excellent for flat and horizontal and fillet welds. The welding efficiency is high. The weld metal is formed in good shape due to some special elements contained in the wire.

Applications:

Suitable for butt weld and fillet weld of 550MPa or 600Mpa grade high strength steel, such as contruction structure, bridges, pressure vessel etc.

Instructions:

A. Suitable for using shielding gas at the speed of 20-25 liters per minute.

B. Windshield must be set up in thew welding zone, due to gas porosity may be caused by strong wind.

C. Wire extention should be 10-20mm if the current range is under 300A, if above 300A, 20-25mm.