Mobile Website Description:
E10015-D2 is low hydrogen sodium type welding electrode for low alloy steel. DC is applied and the electrode should be contacted reversed polarity. It is suitable for all postion welding.
Applications:
It is used for welding 15MnMoV, 14MnMoVB, 18MnMoNb.etc.
Attention:
a. Welding electrodes should be baked at the temperature of 380-400℃ for one hour before welding.
b. Before welding, the weld metal must be cleared away impurities, such as rust, oil, moisture,etc.
c. Short arc and narrow weld bead are recommended in welding.
Previous: Welding Electrode E309-16
Next: Welding Wire ER100S-G
Home 丨Products丨Quality Control丨News丨About Us丨Contact Us 丨Sitemap
manager@hbaining.com +86 133 6380 3091 No.313 East Of Heping Road,Shijiazhuang,China
Copyright © Hebei Aining Welding Consumable Co., Ltd. Technical Support: Reanod
Description:
E10015-D2 is low hydrogen sodium type welding electrode for low alloy steel. DC is applied and the electrode should be contacted reversed polarity. It is suitable for all postion welding.
Applications:
It is used for welding 15MnMoV, 14MnMoVB, 18MnMoNb.etc.
Attention:
a. Welding electrodes should be baked at the temperature of 380-400℃ for one hour before welding.
b. Before welding, the weld metal must be cleared away impurities, such as rust, oil, moisture,etc.
c. Short arc and narrow weld bead are recommended in welding.
Previous: Welding Electrode E309-16
Next: Welding Wire ER100S-G
Home 丨Products丨Quality Control丨News丨About Us丨Contact Us
manager@hbaining.com +86 133 6380 3091 No.313 East Of Heping Road,Shijiazhuang,China
+86 133 6380 3091
No.313 East Of Heping Road,Shijiazhuang,China
No.313 East Of Heping Road,Shijiazhuang,China
Copyright © Hebei Aining Welding Consumable Co., Ltd.
All Rights Reserved. Technical Support: Reanod
Apr. 22, 2022
Description:
E10015-D2 is low hydrogen sodium type welding electrode for low alloy steel. DC is applied and the electrode should be contacted reversed polarity. It is suitable for all postion welding.
Applications:
It is used for welding 15MnMoV, 14MnMoVB, 18MnMoNb.etc.
Attention:
a. Welding electrodes should be baked at the temperature of 380-400℃ for one hour before welding.
b. Before welding, the weld metal must be cleared away impurities, such as rust, oil, moisture,etc.
c. Short arc and narrow weld bead are recommended in welding.
Previous: Welding Electrode E309-16
Next: Welding Wire ER100S-G
Home 丨Products丨Quality Control丨News丨About Us丨Contact Us
manager@hbaining.com +86 133 6380 3091
No.313 East Of Heping Road,Shijiazhuang,China
Copyright © Hebei Aining Welding Consumable Co., Ltd. Technical Support: Reanod
