Mobile Website E312-16
E312-16 alloy Type: A5.4, STAINLESS STEEL Covered Arc Welding Electrodes
E312-16 is used for welding type 316L or 318 stainless steels. It has a maximum of .04% carbon content in the weld metal, which reduces the possibility of carbine precipitation and consequent intergranular corrosion. This electrode is widely used in the welding of chemical equipment.
Typical Applications:
Used for welding wrought and cast alloys as well as for welding dissimilar metals
Typical Applications:
Used for welding wrought and cast alloys as well as for welding dissimilar metals
| AWS Class: E312-16 | Certification: AWS A5.4/A5.4M:2006 |
| Alloy: E312-16 | ASME SFA A5.4 |
| Welding Position: F, V, OH, H | Current: AC-DCEP |
| Tensile Strength, kpsi: | 95 min |
| Yield Strength, kpsi: | *NS |
| Elongation %: | 22 min |
*Not Specified
Typical Wire Chemistry as per AWS A5.4 (single values are maximum)
| C | Cr | Ni | Mo | Mn | Si | P | S | Cu |
0.15 | 28.0-32.0 | 8.0-10.5 | 0.75 | 0.5-2.5 | 1.00 | 0.04 | 0.03 | 0.75 |
| Typical Welding Parameters | |||||
| Diameter | Process | Volt | Amps (flat) | Amps (V/OH) | |
| in | (mm) | ||||
| 3/32 | (2.4) | SMAW | 24-28 | 70-85 | 65-75 |
| 1/8 | (3.2) | SMAW | 26-30 | 85-110 | 80-90 |
| 5/32 | (4.0) | SMAW | 28-32 | 110-140 | 100-120 |
| 3/16 | (4.8) | SMAW | 28-32 | 120-160 | 110-130 |
Previous: what's the difference between E6010 E6011 and E6013 welding electrode ？
Next: Advantages of Stainless Steel E309-16 Welding Electrodes
Home 丨Products丨Quality Control丨News丨About Us丨Contact Us 丨Sitemap
manager@hbaining.com +86 133 6380 3091 No.313 East Of Heping Road,Shijiazhuang,China
Copyright © Hebei Aining Welding Consumable Co., Ltd. Technical Support: Reanod
E312-16
E312-16 alloy Type: A5.4, STAINLESS STEEL Covered Arc Welding Electrodes
E312-16 is used for welding type 316L or 318 stainless steels. It has a maximum of .04% carbon content in the weld metal, which reduces the possibility of carbine precipitation and consequent intergranular corrosion. This electrode is widely used in the welding of chemical equipment.
Typical Applications:
Used for welding wrought and cast alloys as well as for welding dissimilar metals
Typical Applications:
Used for welding wrought and cast alloys as well as for welding dissimilar metals
| AWS Class: E312-16 | Certification: AWS A5.4/A5.4M:2006 |
| Alloy: E312-16 | ASME SFA A5.4 |
| Welding Position: F, V, OH, H | Current: AC-DCEP |
| Tensile Strength, kpsi: | 95 min |
| Yield Strength, kpsi: | *NS |
| Elongation %: | 22 min |
*Not Specified
Typical Wire Chemistry as per AWS A5.4 (single values are maximum)
| C | Cr | Ni | Mo | Mn | Si | P | S | Cu |
0.15 | 28.0-32.0 | 8.0-10.5 | 0.75 | 0.5-2.5 | 1.00 | 0.04 | 0.03 | 0.75 |
| Typical Welding Parameters | |||||
| Diameter | Process | Volt | Amps (flat) | Amps (V/OH) | |
| in | (mm) | ||||
| 3/32 | (2.4) | SMAW | 24-28 | 70-85 | 65-75 |
| 1/8 | (3.2) | SMAW | 26-30 | 85-110 | 80-90 |
| 5/32 | (4.0) | SMAW | 28-32 | 110-140 | 100-120 |
| 3/16 | (4.8) | SMAW | 28-32 | 120-160 | 110-130 |
Previous: what's the difference between E6010 E6011 and E6013 welding electrode ？
Next: Advantages of Stainless Steel E309-16 Welding Electrodes
Home 丨Products丨Quality Control丨News丨About Us丨Contact Us
manager@hbaining.com +86 133 6380 3091 No.313 East Of Heping Road,Shijiazhuang,China
+86 133 6380 3091
No.313 East Of Heping Road,Shijiazhuang,China
No.313 East Of Heping Road,Shijiazhuang,China
Copyright © Hebei Aining Welding Consumable Co., Ltd.
All Rights Reserved. Technical Support: Reanod
Apr. 07, 2023
E312-16
E312-16 alloy Type: A5.4, STAINLESS STEEL Covered Arc Welding Electrodes
E312-16 is used for welding type 316L or 318 stainless steels. It has a maximum of .04% carbon content in the weld metal, which reduces the possibility of carbine precipitation and consequent intergranular corrosion. This electrode is widely used in the welding of chemical equipment.
Typical Applications:
Used for welding wrought and cast alloys as well as for welding dissimilar metals
Typical Applications:
Used for welding wrought and cast alloys as well as for welding dissimilar metals
| AWS Class: E312-16 | Certification: AWS A5.4/A5.4M:2006 |
| Alloy: E312-16 | ASME SFA A5.4 |
| Welding Position: F, V, OH, H | Current: AC-DCEP |
| Tensile Strength, kpsi: | 95 min |
| Yield Strength, kpsi: | *NS |
| Elongation %: | 22 min |
*Not Specified
Typical Wire Chemistry as per AWS A5.4 (single values are maximum)
| C | Cr | Ni | Mo | Mn | Si | P | S | Cu |
0.15 | 28.0-32.0 | 8.0-10.5 | 0.75 | 0.5-2.5 | 1.00 | 0.04 | 0.03 | 0.75 |
| Typical Welding Parameters | |||||
| Diameter | Process | Volt | Amps (flat) | Amps (V/OH) | |
| in | (mm) | ||||
| 3/32 | (2.4) | SMAW | 24-28 | 70-85 | 65-75 |
| 1/8 | (3.2) | SMAW | 26-30 | 85-110 | 80-90 |
| 5/32 | (4.0) | SMAW | 28-32 | 110-140 | 100-120 |
| 3/16 | (4.8) | SMAW | 28-32 | 120-160 | 110-130 |
Previous: what's the difference between E6010 E6011 and E6013 welding electrode ？
Next: Advantages of Stainless Steel E309-16 Welding Electrodes
Home 丨Products丨Quality Control丨News丨About Us丨Contact Us
manager@hbaining.com +86 133 6380 3091
No.313 East Of Heping Road,Shijiazhuang,China
Copyright © Hebei Aining Welding Consumable Co., Ltd. Technical Support: Reanod
